If transporting a variety of bulk and solid loads is what you need and you don’t want the restrictions of enclosed bodywork, then a Citroën Dropside conversion is the right choice for you and your business. A popular model in the Ready to Run range, with a variety of different professions including outdoor trades, such as light construction and landscaping, a dropside converted vehicle has many benefits on offer.
Both side and tailboards are hinged along the lower edges, pivoting down below deck level for loading. The practical, open bodywork can transport a mix of loads and equipment as required. In fact, dropsides offer two bodies in one. By removing the side boards, tailboard and the rear corner posts, the Citroën Relay Ready to Run Dropside can be transformed into an open flatbed body, ready to carry palletised loads in particular.
|MODEL||L2 SINGLE CAB||L3 SINGLE CAB||L3 CREW CAB|
|WHEELBASE||3450 mm||4025 mm||4025 mm|
|INTERNAL LENGTH||3059 mm||3644 mm||2805 mm|
|INTERNAL WIDTH||2026 mm||2026 mm||2025 mm|
|SIDEBOARD HEIGHT||400 mm||400 mm||400 mm|
|TAILBOARD HEIGHT||400 mm||400 mm||400 mm|
|OVERALL LENGTH||5645 mm||6299 mm||6229 mm|
|PAYLOAD*||1441 kg||1366 kg||1253 kg|
The Ready to Run Dropside range is made up from three models; the L2 Single Cab, L3 Crew Cab and L3 Single Cab. These models offer three different deck lengths. The Crew Cab model provides a second row of seats and can carry a driver and up to six passengers. The Ready to Run Dropside range provides payloads between 1,253kg* and 1,441kg*.
*Payload (excluding driver) is calculated including oil, water, lubricants, tools, spare wheel and 90% full fuel tank. When calculating the payload, an average figure for the driver is 75kg (Please note: drivers’ weights will vary). Additional passengers and accessories must be taken into account. It is the operator’s responsibility that the plate weights are not exceeded. Please note: Masses and Dimensions are subject to 8% engineering tolerances.
The Ready to Run Dropside features a robust, yet lightweight construction. The load floor is manufactured from a single sheet of heavy-duty birch plywood, finished with a non-slip coating. The floor is assembled so that there are no load retaining rings set into it. These are fitted into the powder-coated aluminium perimeter rail instead.
Dropside bodywork can lead a hard life, so the body structure uses bolted construction, ensuring that damaged parts can be replaced quickly. Citroën can usually supply parts in 24 hours. Single-piece aluminium profiles are used to form the body side and tailboards. The smooth, silver anodised finish provides a surface that is easy to keep clean and is ready-made to take corporate livery. Corrosion resistance is important particularly for steel parts and these have been comprehensively tested to ensure they provide the high level required.
Ready to Run Dropside bodies are all equipped with a front bulkhead/gantry which extends to the height of the cab, as standard. Cab occupants are protected from a shifting load by an embossed steel panel fitted to it. The gantry is constructed around three horizontal load rails, designed to provide securing points for loads of different shapes and sizes. The upper rail incorporates 1,000kg capacity load securing rings. This rail can also support loads that are too long to rest on the load floor.
The cab provides a number of storage spaces, including large door pockets and two gloveboxes, one of which is lockable. The cab provides secure storage thanks to deadlocking doors and remote control central locking. In addition to the comprehensive standard specification, the Ready to Run Dropside is available with an extensive list of options and accessories so you can easily choose the equipment you need. Options include a tow bar and electrics, light bars, toolboxes and a tail lift.
2 USB PORTS
EXTENDABLE WRITING PANEL
As well as the extensive range of features you can have on your Citroën converted vehicle you also benefit from a 3-year warranty, Full European Type approval, 10-year parts support commitment and much more. To find out more, contact your local business centre and discover all of the benefits of a Citroën converted vehicle.
If you would like more information on the Citroen Ready to Run range please get in touch with us at Snows Citroën Basingstoke today to make an appointment. The simplest way to do so is via our website but please feel free to phone or visit us any day of the week.