The fantastic Dropside is now available at Snows Peugeot Business Centre based in Basingstoke. This converted van is part of the Peugeot Built for Business Range, an off the shelf programme that offers converted vans with shortened delivery times.
With loading manually or by forklift in mind Peugeot designed this van to make your life easier. As it can easily be transformed into an open flatbed body by removing corner posts, side and tailboards, or you can take advantage of the side and tailboards hinges along the lower edge, pivoting down below floor level for loading.
To keep the trailer robust and lightweight, the load floor is covered with a single sheet of heavy-duty birch plywood which is finished with a non-slip coating. The floor is kept clear of load retaining rings which are incorporated into the powder-coated aluminium perimeter.
Bolted construction is used for the body structure to enable damaged parts to be replaced quickly. Parts can usually be supplied in 24 hours. All steel parts have been comprehensively tested to ensure corrosion resistance.
The gantry’s three load rails provide securing points for loads of different shapes and sizes, with 1,000kg capacity load securing rings in the upper rail, which can also support loads too long to rest on the load floor.
Three Peugeot Dropside models make up the range, the Crew Cab model provides a second row of seats and can carry a driver and up to six passengers.
Standard specification includes a DAB digital radio, manual air conditioning, electric front windows and electrically adjustable, heated door mirrors, two gloveboxes (one locks), remote control central locking and doors that feature deadlocking. A dual front passenger seat is also standard equipment with the option of a single passenger seat if required. Optional accessories includes a tow bar and electrics, light bars, toolboxes and a tail lift.
*Payload (excluding driver) is calculated including oil, water, lubricants, tools, spare wheel and 90% full fuel tank. When calculating the payload, an average figure for the driver is 75kg (Please note: drivers’ weights will vary). Additional passengers and accessories must be taken into account. It is the operator’s responsibility that the plate weights are not exceeded. Please note: Masses and Dimensions are subject to 8% engineering tolerances.
|Model||L2 Single Cab||L3 Single Cab||L3 Crew Cab|